This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Curved Lug Rubber Straps - Rolex Fitment

£85.00
Lug Width
Size Guide
ColourGreen

Size Guide

Lug Width
The lug is where the strap meets the case of the watch and the lug width is the distance between the left and right ‘lugs’. Typically this is in the region of 18-24mm but straps come in all shapes and sizes
Buckle Width
This is the inside measurement of the buckle width where we will attach either your current buckle or a new one. I also supply buckles so I can recommend a taper (from lug to buckle) or use your current sizes
Length
There are two parts to the strap, the long part which has the buckle holes and the short part that has the buckle attached

I need the length of each of these, typically the standard size is 125/70mm which tends to fit the average sized wrist as an example

To measure this the easiest thing to do is measure a strap that you may already have that fits perfectly and send me these, or alternatively measure the circumference of your wrist with a tape measure or a piece of string to then measure and send me that figure and I can recommend

Please reference the notes below for size appropriate for your wrist

Measuring lug, buckle and length can simply be done with a ruler, but for more accurate measurements I suggest getting some digital calipers online which are very cheap but remarkably helpful if you think you’ll use them again in future. I couldn’t be without mine now!

Bear in mind that the size of the watch head also needs to be taken in to account and deducted from your wrist circumference. Most watch heads are typically 1-1.5″

For a size guide please reference the below and also note that you can simply contact me for any advice at all:

  • 6.1 - 6.5″ wrist (154 – 165mm) = 110/65
  • 6.6 - 7″ wrist (167 – 177mm) = 120/70
  • 7.1 - 7.5″ wrist (180 - 190mm) = 125/75
  • 7.6 - 8″ wrist (193 - 203mm) = 130/80
  • 8.1 – 8.5″ wrist (205 - 215mm) = 135/80
  • 8.6 -9″ wrist (218 – 228mm) = 140/85
  • 9.0+″ wrist (229mm+) = 145/90
Belt Sizing
Take your favourite belt and measure the distance from the base of the buckle where it connects to the leather to your most used hole, in inches

If you do not have a belt to hand simply take the waist size of your favourite jeans and add 2 inches to their waist size

Any concerns please email us to avoid disappointment as our belts are made to order and non refundable
Description

Curved Lug Rubber Strap designed for Rolex Fitment for that perfect integrated look

FKM rubber straps are a man-made rubber watch strap with high density but soft to the touch. It was important to me to find a rubber strap that offered ultimate comfort but very good resistance to the elements. FKM rubber can resist extremes of temperature and it is made to withstand harsh conditions such as chemical exposure making this perfect for summer holiday use - the pool, suncream, heat exposure etc. A long lasting rubber strap that is a joy to wear

Our range of curved lug rubber straps fits various 20mm and 21mm Rolex Models

20mm Strap Fitment:

Rolex Submariner: 116618, 114060, 116610LV, 14060, 16610, 16610LV, 16613, 16618, 16800
Rolex Sea-Dweller: 16600, 126600, 126603
Rolex Deepsea: 126660
Rolex Explorer II: 16570
Rolex Explorer: 214270
Rolex GMT_Master II: 116710BLNR, 126710BLRO, 16700, 16710, 16713, 16718
Rolex Daytona: 116520, 116523, 116528, 116500
Rolex Yatch-Master 40: 16622, 16628

21mm Strap Fitment:

Rolex Submariner 124060, 126610LV, 126610LN, 126619  Rolex Explorer II  216570

Finished with 7 perfectly stamped pin holes for fine adjustment

Please note we only have these available in 120/80mm - they can not be made bespoke

Material: FKM Rubber (Fluoroelastomer)

Stock Strap Length: 120/80mm

Width: 20mm & 21mm

Thickness: 5mm tapering to 2.6mm for supreme comfort

Buckle: Brushed PIn Buckle

Pins: You should retain your original Rolex pins and fit the rubber strap using these to ensure secure fitment

Note: This strap is not manufactured or endorsed by Rolex SA. It is a third-party accessory designed for use with compatible Rolex models.

Specifications
Our range of curved lug rubber straps fits various 20mm and 21mm Rolex Models

20mm Strap Fitment:

Rolex Submariner: 116618, 114060, 116610LV, 14060, 16610, 16610LV, 16613, 16618, 16800
Rolex Sea-Dweller: 16600, 126600, 126603
Rolex Deepsea: 126660
Rolex Explorer II: 16570
Rolex Explorer: 214270
Rolex GMT_Master II: 116710BLNR, 126710BLRO, 16700, 16710, 16713, 16718
Rolex Daytona: 116520, 116523, 116528, 116500
Rolex Yatch-Master 40: 16622, 16628

21mm Strap Fitment:

Rolex Submariner 124060, 126610LV, 126610LN, 126619  Rolex Explorer II  216570

Finished with 7 perfectly stamped pin holes for fine adjustment

Please note we only have these available in 120/80mm - they can not be made bespoke

Shipping & Returns

Shipping in the UK is FREE and sent 24hr tracked

International shipping varies based on your location and is calculated at checkout. We use DHL Express and DHL Global Mail for international shipments

All import taxes and duties are the responsibility of the buyer.

Returns & Warranty - 12 month warranty offered subject to fair wear and tear. Returns can be made within 28 days of receipt. Read more here

Loved by 3,000+ happy customers

Worldwide shipping

Curved Lug Rubber Straps - Rolex Fitment

£85.00

Materials

Quality to be proud of.

Sourcing the finest leathers and materials has always been at the core of our business. We source leather from all over the world but largely from Europe, England and Japan. We are always on the hunt for new and exciting leathers that are beautiful to us and I hope to you as well.

We do not use skins or hides from animals farmed for their skin alone. All leathers and skins are a bi-product of the meat industry. This is a personal choice and one we are committed to.

Cart

No more products available for purchase

Your Cart is Empty